Door Closer Repair and Replacement in Milwaukee

Locksmith Milwaukee Now repairs, adjusts, and replaces door closers in Milwaukee and about 30 miles around it, on storefronts, offices, apartment entries, and back doors. Door closer repair starts at $99, and replacement starts at $199. We work 24/7, every day of the year. Call or text us with a short video of the door closing.

Signs a door closer needs work

A door closer is the arm and the hydraulic body at the top of the door that pulls it shut. Door closer repair calls in Milwaukee usually start with one of these:

  • The door slams. It hits the frame hard, rattles the glass, and wears the latch.
  • The door closes too slowly. It stays open long enough to let the cold in, or it stops short of the latch.
  • The door does not latch. It closes but stays loose, so the lock never catches.
  • The wind takes the door. It swings open hard and hits the wall or the railing.
  • Oil on the floor or on the body. A leaking closer has lost the fluid that controls the door.
  • The arm is loose or bent. After a gust of wind, a cart, or a delivery.

Adjusting a closer usually takes 15 to 30 minutes, and replacing one about an hour.

How a closer controls the door

A closer works the door in three zones. Backcheck slows the door near full open, so it does not hit the wall. Sweep speed sets how fast the door travels for most of the swing. Latch speed sets the last few inches, with enough push to get the latch over the strike. Each zone has its own adjustment in the closer body.

A closer works the door in three zones: backcheck near full open, sweep speed for most of the swing, and latch speed for the last few inches before the door latches.CloserBackcheckSweep speedLatch speedHinge side
A closer works the door in three zones: backcheck near full open, sweep speed for most of the swing, and latch speed for the last few inches before the door latches.

Adjust, repair, or replace

Many slamming or slow doors need an adjustment: we set the sweep, the latch speed, and the backcheck until the door closes firmly and quietly. A bent or loose arm is straightened or replaced, and the closer is remounted on solid metal. A closer that leaks oil has lost the fluid that controls the door, and most closers are sealed units, so it is replaced. We match the size and the mounting, or set up a new closer that fits the door better.

Closers we work on

  • Surface closers. Regular arm on the pull side, parallel arm on the push side, and top jamb mounts.
  • Concealed closers. Hidden in the top of the frame, common on aluminum storefronts.
  • Floor closers. Set in the floor under glass doors and some storefronts.
  • Closers on apartment entries and fire doors. Shared doors that have to close and latch every time.

We work with LCN, Norton, Dorma, Sargent, Yale, Corbin Russwin, Falcon, and other common brands.

Door closers and the Milwaukee winter

Cold thickens the fluid inside a closer, so a door that closed well in September can close slowly in January and fail to latch. Wind off the lake pushes on entry doors in the cold months too. A seasonal adjustment brings the door back to a steady close, and a closer that cannot keep up in the cold can be replaced with one rated for a wider range of temperatures.

How a door closer visit goes

  1. Send a videoText us or call with the address and a short video of the door opening and closing.
  2. Show you run the buildingA photo ID and a business license, a lease, or a letter from the owner or the property manager.
  3. Adjust, repair, or replaceWe set the speeds, repair the arm, or install a new closer that fits the door.
  4. Test the closeWe open the door all the way and from halfway, and check that it closes and latches every time.

Send us a short video of the door closing.

Door closer prices in Milwaukee

Door closer repairfrom $99
Door closer replacementfrom $199
Panic bar repairfrom $129
Commercial rekey, first cylinderfrom $79

The starting prices are for a standard surface closer. Concealed and floor closers, double doors, or a closer that has to be ordered cost more, and we confirm the price on site before we start. Every business service is on our commercial locksmith page.

Closers, latches, and panic bars work together

A door that does not latch is not always a closer problem. The latch may be worn, the strike may be off, or the panic bar may hold the latch back. We check the whole door, so the fix lasts. On a storefront, the closer and the storefront lock are checked together.

Questions about door closers in Milwaukee

How much does door closer repair cost?

Repair starts at $99, and a new closer starts at $199. We confirm the price on site after we look at the door.

Why does my door slam?

The sweep or the latch speed is set too fast, or the closer has lost fluid. We adjust it or replace it.

Why does my door close slowly in winter?

Cold thickens the fluid in the closer. A seasonal adjustment brings the door back to a steady close.

Can you refill a leaking door closer?

Most closers are sealed units, so a leaking closer is replaced with a new one that fits the door.

Do you work on apartment entry doors?

Yes. We adjust and replace closers on apartment entries, so the shared door closes and latches every time.

How long does door closer repair take?

An adjustment usually takes 15 to 30 minutes, and a new closer about an hour.

Other business locksmith services in Milwaukee

Door slamming or not closing?

Call nowText us